Does It Matter Which DIMM Slot I Put My Ram In?

How do I know if my RAM slot is bad?

Open your computer and check the slots through trial and error.

The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly.

Remove all RAM sticks and place one you know is functional into the first slot on your motherboard..

Can you put ram side by side?

Ram slots on motherboards are placed alongside each other. Thus Rams are therefore installed right next to each other. On many motherboards, installing 2 rams, of similar make, capacity and speed, will produce what is called Dual channel mode. This mode speeds up memory.

Is ddr4 faster than ddr3?

Faster data transfer speed DDR4-3200, the latest industrial DDR4 offering from ATP, transfers data about 70% faster than DDR3-1866, one of the fastest DDR3 versions available, for a big boost in theoretical peak performance.

Can I add 8gb RAM to 4gb laptop?

In technical aspect, a 8GB RAM stick can be added to a computer 4GB RAM as long as both of 8GB and 4GB have the same speed front side bus speed. For better performance, the both of RAM sticks should have also same size not only same speed. It means that, the second RAM stick should be 4GB instead of 8GB stick.

Does it matter what slot you put your graphics card in?

These motherboards work just fine with only one video card, regardless of how many open slots are available. The graphics card should go into the first PCI Express x16 slot. However, lower slots are usually capable of running the card as well.

Can I use 4gb and 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … Sometimes you will have to swap the RAM slots since the detection has bugs.

Can you use two different brands of RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well. So yes. Different brands of Ram are fine to use together.

Does it matter what slots I put my ram in?

Normally, you fill Bank 1 first and then bank 2. If the RAM is mismatched then you want to Place matching pairs together If all RAM is the same brand and size, then it does not matter. If you have 2 4GB RAM cards and 1 8 GB Card then the two 4GB cards go in slots 0&1. And the single 8GB card goes in slot 2.

Can I put ddr4 RAM in any slot?

A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot. … DDR4 normally runs at 1.2 volts, down from DDR3’s 1.5V. It doesn’t sound like much, and there are low voltage DDR3L modules as well as enthusiast DDR4 modules where voltages overlap, but the standard modules are 1.2V vs.

What happens if you put RAM in wrong slots?

If you have two sticks of ram and two slots there is no such thing as a “wrong slot”. If you have 4 memory slots and you put your two sticks in the wrong slot (assuming it boots) then it will just run at lower performance then it could and windows would be oblivious to this.

What happens if you use ddr3 instead of ddr4?

No, you can’t use DDR3 on a board that has DDR4 memory slots only. They won’t fit and won’t work.

Can I replace ddr3 RAM with ddr4?

DDR4 RAM is not backwards compatible with DDR3 motherboards and vice versa. The notch has been moved to prevent accidental insertion of the wrong type of memory. You will not be able to change to DDR-4 .

Do all 4 sticks of RAM have to be the same?

You can even mix sticks although not recommended and a higher chance for the ram not playing nice together. Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Can you use 3 RAM sticks?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Which RAM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Which DIMM slot for single RAM?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.

Can I put RAM in slots 1 and 3?

^ There are four slots here. If using unbalanced RAM (a 2GB and a 4GB module, for instance) pair up RAM in slots 1 and 3 or 2 and 4. If there is old RAM here and you are going to use it, pair the new RAM correctly. Try not to put three modules in a 4 module slot.