Question: Do You Cut Off Selvage When Making Curtains?

How do you cut fabric for curtains?

Lay out your fabric and fold it in half the long way.

Keep the long side edges straight.

Fold up the first say, 45″, SO at 45″ you have a fold across the width of fabric.

If you move THIS fold up to meet the cut line you will then have a straight line to follow to cut..

Does it matter which way you cut fabric?

These will hold the pattern in place while you cut. Keep in mind that if you have a fabric with a pile or one-way pattern, all pieces should face the same direction. See my blog article for cutting one-way or directional fabrics. This symbol means place on the fold.

Do you fold fabric selvage to selvage?

Place the selvage edges together lengthwise. Here’s a photo of a pattern layout with the fabric folded in half lengthwise with the selvage edges together, the most common way to fold fabric for garment making. … To do so take both selvage edges and have them meet in the middle.

Is the selvage edge always straight?

The selvage line is generally always straight. Sometimes you will see it waver just a bit but it pretty much gives you a straight line. So, cut off the line of selvage in a straight line…. and you have your straight edge of fabric to work from.

What is the selvage edge of material?

A selvage (US English) or selvedge (British English) is a “self-finished” edge of a piece of fabric which keeps it from unraveling and fraying. The term “self-finished” means that the edge does not require additional finishing work, such as hem or bias tape, to prevent fraying.

Do I need to cut off the selvage?

The selvage is the tightly woven edge on either side of a width of fabric. The selvage doesn’t move or stretch the same as the rest of the fabric so you’ll want to cut them off (or square up) before cutting the rest of the fabric.

Is the width of fabric from selvage to selvage?

Quilting fabrics are usually 42 to 44 inches wide when measured across their width from selvage to selvage. It is easy to see the selvage edges, although they often change in appearance along their lengths.

Which way is the Grainline on fabric?

When you place a pattern on the fabric, you align the pattern’s grainline with the fabric’s lengthwise grain. Unless otherwise noted, grain or grainline generally refers to the lengthwise grain. True Bias is an invisible line that’s at a 45 degree angle to the crosswise and lengthwise grain.

Do you cut fabric on the wrong side?

Fold the fabric as shown in the instructions, with right sides of the fabric together. Most patterns indicate the right side (the pretty side) using a darker shade than the wrong side. (Occasionally, you may be instructed to cut a fabric on the right side, or to “cut one” meaning to cut on single layer.)

How do you cut selvage into Selvage?

So if you have a piece of fabric laying down flat, and your selvage is along the bottom…….. Then you can fold edge of the fabric on the left, down to the selvage edge, creating a diagonal fold. If you cut right along that diagonal fold, you are cutting on the bias……or a 45 degree angle to the selvage.

How do you keep raw edges from fraying?

Widen Seams. Cut sheer fabrics with a wider seam allowance. … Sew French Seams. Create a French seam with a wider seam allowance. … Use Interfacing. Using iron-on fusible interfacing on the edges works very well to stop fraying. … Pinking Shears. … Zig-Zag Stitch. … Handstitch. … Use a Serger. … Bias Tape Bound Edges.More items…•

What does it mean to cut selvage to selvage?

It can also be useful for choosing thread colors. When the fabric is measured, it is cut from the bolt by cutting perpendicular to the edge of the material leaving the selvage alongside each side of the cut fabric. Now we know what is selvage, it is on to learning about fabric grain.